Privacy Fence cost

Taylor_EFNY_REG_FINAL_1024x.jpg

you should escape ASAP IMO
 
Depends on the style and quality of the fencing, and if you're doing it yourself or not.

Buying contractor grade fence panels from home depot, you're looking at 13x8' panels @ about 100$ a piece, and those are only 6' tall. Plus posts, concrete etc etc. Probably close to 2k, and that would be the cheapest option available.

Not even sure they make 8' tall panles, so you're looking at custom built, which us $$$$$$
 
3k on the low end. Have to factor in wood is at a high price right now.

I’m looking for something similar and was quoted anywhere from $3500 to over $5000.
 
I have a 6ft breezeblock wall and added 4ft of privacy fencing to it, starting 2ft below and rising 2ft above existing wall. Did it because neighbour has concrete foundation, we have a raised foundation. So every time i took a piss in our bathroom i could see right down into their living room.

Fastened 2x4s vertically(3.5ft long) every 6ft wide and then nailed 12ft long 1x6 douglas fir fence panels horizontally onto the 2x4 studs. Used 1/2" drywall scraps as a spacer and then stapled a black weed barrier fabric on the back.

Went 36ft long and the materials came to about $120(5 panels high) + $20 for a walnut stain + $20 for a clear coat sealer. Tapcon concrete screws $20 from Ganahl lumber.
 
Last edited:
Mark Hunts FIST said:
Privacy fence cost. Looking to replace about 100 feet, 8 ft tall.
Click to expand...
Wood or chain link?
I paid $1,800 for a 30 yard (90 feet) wood fence 5 years ago. The fence has a height of 6 feet.
Why do you need it to be 8 feet high? That will make it more expensive. Not the standard height.
It will last about 5 years if the wood is not coated or painted.
Go with the metal posts to hold the wood fence. I went with the wood posts and they tend to rot or break (wind) after 3 years. If it is a chain link fence, it will be a fortune.
 
Last edited:
Brandon Wilson said:
Depends on the style and quality of the fencing, and if you're doing it yourself or not.

Buying contractor grade fence panels from home depot, you're looking at 13x8' panels @ about 100$ a piece, and those are only 6' tall. Plus posts, concrete etc etc. Probably close to 2k, and that would be the cheapest option available.

Not even sure they make 8' tall panles, so you're looking at custom built, which us $$$$$$
Click to expand...
Anything 8' or above usually requires a permite
 
Zebra Cheeks said:
What material are you looking for?
Click to expand...
Cedar..

Dober4 said:
3k on the low end. Have to factor in wood is at a high price right now.

I’m looking for something similar and was quoted anywhere from $3500 to over $5000.
Click to expand...
I'm being told that only 'imported Cedar" is available currently... whatever that means.

I got a quote for 3800 and i was like... huh?
 
blokeybloke said:
I have a 6ft breezeblock wall and added 4ft of privacy fencing to it, starting 2ft below and rising 2ft above existing wall. Did it because neighbour has concrete foundation, we have a raised foundation. So every time i took a piss in our bathroom i could see right down into their living room.

Fastened 2x4s vertically(3.5ft long) every 6ft wide and then nailed 12ft long 1x6 douglas fir fence panels horizontally onto the 2x4 studs. Used 1/2" drywall scraps as a spacer and then stapled a black weed barrier fabric on the back.

Went 36ft long and the materials came to about $120(5 panels high) + $20 for a walnut stain + $20 for a clear coat sealer. Tapcon concrete screws $20 from Ganahl lumber.
Click to expand...

You lost me at breezelbock.. but it sounds incredible! thank you for this post!
 
You must log in or register to reply here.

Latest posts

Forum statistics

Threads
1,280,182
Messages
58,264,440
Members
175,986
Latest member
Dakota DeSousa

Share this page

Back
Top